Best 3D printers for beginners, compared

Last checked: November 2026

If you want the lowest entry price, the Creality Ender-3 V3 SE (£149) and the Anycubic Kobra 4 (£159) were the cheapest machines we found on makers’ own UK stores. If you want multi-colour printing from day one, the Kobra 4 Combo and the Bambu Lab A1 and A1 mini Combos bundle a filament-switching unit. If you expect to print ABS or ASA, look at an enclosed printer such as the Elegoo Centauri Carbon 2 or the Creality K1 Max. If open-source firmware matters more than price, read about the Prusa MK4S.

All figures come from makers’ published specifications and store listings, checked on 22 November 2026. We have not tested these printers. Black Friday promotions were running, so sale and regular prices are both given where shown.

Comparison table

Model Build volume (mm) Max speed (published) Enclosure Multi-colour Noise (published) Warranty (as stated) Price seen
Bambu Lab A1 mini 180 × 180 × 180 500 mm/s None listed AMS lite in Combo “49dB” 2 years (US store) US: $199 sale, $219 typical. UK retailer: £139 sale, £149 regular
Bambu Lab A1 256 × 256 × 256 500 mm/s None listed AMS lite in Combo “49dB” 2 years (US store) US: $259 sale, $299 typical. UK retailer: £215.61, RRP £287.78
Creality Ender-3 V3 SE 220 × 220 × 250 (retailer) 250 mm/s Sold separately (£69.99) Not stated Not published Up to 12 months UK: £149 sale, £189 regular
Creality K1 Max 300 × 300 × 300 600 mm/s Fully enclosed Not stated Not published Up to 12 months UK: £589 sale, £729 regular
Anycubic Kobra 4 260 × 260 × 260 600 mm/s None listed Needs ACE 2 Pro (in Combo) ≤48 dB 1 year UK: £159 sale; Combo £239 sale, £449 regular
Elegoo Centauri Carbon 2 256 × 256 × 256 500 mm/s Enclosed chamber CANVAS unit sold separately Under 45 dB Not confirmed UK: £259 sale, £309 regular
Original Prusa MK4S 250 × 210 × 220 Not published Optional add-on MMU3 add-on, up to 5 Not published 2 years EU consumers, 1 year elsewhere Kit 819 EUR, assembled 1,099 EUR

Speeds are the makers’ maximum figures, not typical print speeds.

FDM versus resin in three sentences

FDM printers melt plastic filament and lay it down in layers; all seven printers here are FDM. Resin printers cure liquid resin with light, which gives finer detail on small models but means handling liquid resin and washing and curing each print. For a first printer for general household parts, toys and models, FDM is the simpler starting point.

The printers

Bambu Lab A1 mini

Bambu Lab lists a 180 × 180 × 180 mm build volume, a 500 mm/s maximum toolhead speed and 10,000 mm/s² maximum acceleration. The store page lists “full-auto calibration” and “49dB” operation. The spec sheet rates PLA, PETG, TPU and PVA as “ideal” and ABS, ASA, PC, PA and fibre-reinforced materials as “not recommended”. The Combo adds the AMS lite for multi-colour printing.

Bambu Lab’s UK and EU stores redirected to the US store, so its own GBP and EUR prices are not confirmed. The US store showed $199 (typical $219), or $299 (typical $329) for the Combo. UK reseller Additive-X listed the printer at £139 on offer, £149 regular. A UK price for the Combo is not confirmed.

  • Best for: small desks and low budgets, based on the lowest price and smallest footprint here (347 × 315 × 365 mm, 5.5 kg).
  • Drawback: the 180 mm build volume is the smallest in this comparison.

Bambu Lab A1

The A1 has the same published speed, acceleration and filament list as the A1 mini, with a 256 × 256 × 256 mm build volume. The US store showed $259 (typical $299) for the printer and $359 (typical $399) for the A1 Combo with AMS lite. UK retailer 3DJake listed the A1 at £215.61 against an RRP of £287.78, and the Combo at £305.83 against an RRP of £423.10, both including VAT. The US store states a 2-year warranty; UK and EU terms are not confirmed.

  • Best for: beginners who want a mid-size bed and a factory multi-colour option from the same maker.
  • Drawback: the maker does not recommend ABS, ASA or nylon on it, and no enclosure is listed.

Creality Ender-3 V3 SE

Creality’s UK store lists a 250 mm/s top speed, CR Touch auto levelling, a Sprite direct extruder and dual Z-axis. Creality’s product page gives 2,500 mm/s² maximum acceleration and names PLA, PETG and TPU. Retailer 3DJake lists the build volume as 220 × 220 × 250 mm; we could not read it on Creality’s pages.

The UK store price was £149, against a struck-through £189. Creality sells a separate enclosure for £69.99. The store states “up to 12-month warranty”.

  • Best for: the lowest UK list price in this comparison from a maker’s own store.
  • Drawback: the slowest published top speed here (250 mm/s), and no multi-colour option is stated on the page.

Creality K1 Max

Of the K1 family, only the K1 Max appeared in Creality’s UK printer collection on the day we checked. The K1, K1C and K1 SE were not listed there.

The UK store describes the K1 Max as fully enclosed, with a 300 × 300 × 300 mm build volume, 600 mm/s speed, an AI camera, LiDAR-assisted first-layer checks and support for “up to 11 types of filament”. It was £589, against a regular £729, with “up to 12-month warranty”.

  • Best for: large prints in an enclosed machine, based on the biggest build volume here.
  • Drawback: it costs roughly four times the Ender-3 V3 SE, and noise and the full filament list are not published on the store page.

Anycubic Kobra 4

Anycubic lists a 260 × 260 × 260 mm build volume, a recommended speed of 300 mm/s, a maximum of 600 mm/s and maximum acceleration of 20,000 mm/s². Levelling is automatic (LeviQ 3.0, 49 points). Published noise is ≤48 dB in standard mode and ≤45 dB in silent mode. Supported filaments are PLA, PETG and TPU 95A, with a 300 °C nozzle.

Multi-colour printing needs the ACE 2 Pro unit, which is included in the Kobra 4 Combo (four colours). Anycubic notes that TPU 95A does not work through the ACE 2 Pro. The UK store showed the printer at £159 and the Combo at £239 (regular £449), VAT included, with a 1-year warranty. A regular price for the printer alone was not shown.

  • Best for: low-cost multi-colour printing, based on the Combo’s sale price.
  • Drawback: the filament list is limited to PLA, PETG and TPU, and the 1-year warranty is shorter than some rivals.

Elegoo Centauri Carbon 2

Elegoo’s UK link for the Centauri Carbon now leads to the Centauri Carbon 2. Elegoo lists a 256 × 256 × 256 mm build volume, CoreXY motion, up to 500 mm/s (250 mm/s recommended), up to 20,000 mm/s² acceleration, a 350 °C nozzle, an enclosed chamber, full-auto calibration and operation “under 45 dB”.

The filament list is the longest here. Elegoo rates PLA, PETG, TPU and PLA-CF as “ideal” and ABS, ASA, PC, PA and several carbon-fibre blends as “superior”. The CANVAS multi-colour unit is sold separately at £95 (£90.25 on offer).

The UK store showed £259, against a regular £309, as a pre-order with a shipping notice of 22 December 2026. Warranty length is not confirmed; the product page does not state a period.

  • Best for: printing ABS and ASA on a budget, based on the enclosed chamber and 350 °C nozzle at this price.
  • Drawback: it was pre-order only when checked, and multi-colour costs extra.

Original Prusa MK4S

Prusa lists a 250 × 210 × 220 mm build volume and automatic mesh bed levelling. It supports PLA, PETG, Flex, PVA, PC, PP, CPE and PVB. ABS, ASA, HIPS and PA are listed only with the optional enclosure. The MMU3 add-on allows up to five colours or materials. It is sold as a kit or assembled.

Prusa’s comparison table gives 819 EUR for the kit and 1,099 EUR assembled, VAT included. The shop on the same page showed $657.40 and $925 during the Black Friday sale. A GBP price is not confirmed. Prusa gives a 2-year warranty to consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland, and 1 year elsewhere, which includes the UK.

  • Best for: buyers who want open-source firmware and a kit option, as stated by the maker.
  • Drawback: the highest price here, with no published top speed or noise figure.

Open versus closed ecosystem

  • Prusa states on its product page that its code is open source.
  • Anycubic lists its own Kobra OS firmware, Anycubic Slicer Next and the Anycubic app, with a choice of cloud or LAN mode.
  • Bambu Lab, Creality and Elegoo: the pages we opened make no clear open-source statement for these models, so this is not confirmed.

Running costs

Filament is the main running cost. These 1 kg PLA prices were on makers’ own stores:

  • Creality UK: Soleyin Ultra PLA, £16.99 on offer, £19.99 regular.
  • Bambu Lab US: PLA Basic, $17.99 regular; $11.69 as an add-on with a printer.
  • Prusa (USD shown): Prusament PLA, $29.99 regular, $23.99 on offer.

How to choose

  • Set the build volume first. 180 mm suits small parts. Around 250 mm covers most household prints. 300 mm is for large single-piece prints.
  • Match the printer to the filament. PLA and PETG work on open-frame printers. Makers list ABS and ASA only for enclosed machines or with an enclosure add-on.
  • Decide on multi-colour now. Combo bundles cost less than adding a unit later on the stores we checked.
  • Compare warranty terms for your country. Stated terms ranged from 1 to 2 years, and some depend on where you live.

FAQ

Do all of these printers level the bed automatically?

Yes, each maker lists automatic levelling or calibration for the model shown.

Can a beginner print in several colours?

Yes, with extra hardware. Bambu Lab and Anycubic sell Combo bundles. Elegoo and Prusa sell the multi-colour unit separately.

Is a faster published speed better?

Not necessarily. Anycubic and Elegoo both recommend a lower everyday speed than their maximum.

Do I need an enclosure?

Not for PLA or PETG, going by the makers’ filament lists. For ABS and ASA, the makers point to enclosed printers.

Why are some prices in dollars?

Bambu Lab’s UK and EU stores redirected to its US store, and Prusa’s shop displayed USD. We added a UK retailer price or the maker’s EUR figure where available.

Sources

All pages checked on 22 November 2026.